WOODEN-IT-BE-NICE -                   Stephen M. Jornov  -  Owner/Craftsman
ALL URNS ARE CUSTOM MADE TO THE REQUESTORS SPECIFICATIONS.  THEY CAN BE MADE FROM ANY WOOD/WOOD COMBINATIONS AS WELL AS OTHER MATERIALS THAT CAN BE ADHEARED TO WOOD.  CUSTOM ENGRAVING IS ALSO AVAILABLE AT ADDITIONAL COST DEPENDING ON WHAT IS TO BE ENGRAVED
 
***************************************************************************
Pine Urn Box    Box is made from 80 year old Reclaimed Pine Barn Boards.   Exterior dimensions are 10-1/2" long  x  7-1/2" Wide  x  4" High and the interior is approximately 165 CU/IN.   Top has a Flamed  Copper insert and the corners have Walnut splines.  Bottom panel is held in place with small screws.
 
Price: $ 165.00 plus shipping
 
 
 
 
Top View of Pine Urn Box showing the Copper Insert Panel and Trim.   Finish is Four coats of Hand Rubbed Gloss TUNG Oil.
 
 
 
 
 
 
 
End View od Pine Urn Box showing Tapered Sides, Walnut Corner Splines and Molding Details of the Top.  Box sits on four soft rubber feet which prevent the box from sliding or scratching the surface it is placed on.
 
 
 
 
 
Box is made from African Mahogany and the Exterior dimensions are 5-3/8" Long x 4" Wide x 3-7/8" High and the Interior dimensions are 3-1/2" Long x 2-1/4" Wide x 3-1/8" Deep.  The interior Area is 24.6 Cu/In.  Corner joints are 1/4" finger joints.  Finish is Four coats of Hand Rubbed Gloss Tung Oil.  
 
Price:   $ 125.00 plus shipping 
 
Side view:  Bottom Trim is custom made from Mahogany and the Top is also Mahogany.  The top has a 3/16" Radius on the top edge and a 1/4" Cove on the bottom edge and is made to fit slightly inside the top and then glued in place. 
 
Was made for a customer in Boston MA
 
 
 
Bottom View:  The Bottom Panel is 1/8" Maple plywood and is held in place with two screws.  There are Felt pads on each corner to prevent the box from scratching the surface it is placed on.
 
 
 
 
 
 
 
Box is made from Curly/Tiger Maple and the Exterior dimensions are 5" Long x 4" Wide x 3" High and the Interior dimensions are 3-3/4" Long x 2-3/4" Wide x 3-1/2" Deep. The Interior Area is 25.75 Cu/In.  Corner joints are 1/4" Finger Joints.  Finish is Four coats of Hand Rubbed Gloss Tung Oil.
 
Price: $ 125.00 plus shipping
 
 
Side view: Bottom Trim is custom made from Maple and has a 15 degree Bevel and the Top egde also has the same Bevel. The top has a real Stone Veneer applied. Bottom panel is 1/8" Maple plywood and is held in place with two screws and has felt pads on each corner to prevent the box from scratching the surface it is placed on.
 
 
 
 
Reclaimed Pine: Box is made from Reclaimed Pine from an 90 year old Barn. Exterior dimensions are 4-3/4" Square x 3" High and the Interior dimensions are 3-1/2" Square x 2" Deep. The interior Area is 24.5 Cu/In. Corner joints as mitered. Finish is Four coats of Hand Rubbed Satin Tung Oil.
 
Price: $ 100.00 plus shipping
 
 
TOP View:  Top frame is made from Spalted Pine and the inset material is Elm Burl.  The bottom is 1/8" Maple Plywood and slides out.  It is held in place with a screw.  Bottom corners have a felt pad to prevent the box from scratching the surface it is placed on.
Website Builder provided by  Vistaprint