WOODEN-IT-BE-NICE -                   Stephen M. Jornov  -  Owner/Craftsman
ALL ITEMS ARE CUSTOM MADE TO ORDER. THEY ARE MADE TO THE SIZE REQUESTED AS WELL AS THE WOOD DESIRED AND ANY INTERIOR OR EXTERIOR TREATMENT REQUIREMENTS.
**********************************************************************************************************

ENTRYWAY Bench / Console


Bench is 76" Long  x  18" Deep  x 18" High for Seat area and 34" High for Console Area.  It was constructed from 3/4" Cabinet Grade Birch Plywood with a 1" thick Poplar Waterfall Top.

Cabinet was Painted and Top was Stained EXPRESSO with three coats of Semi-gloss Polyurethane.


PRICE:  $ 1,500.00 


WALNUT and STEEL Entryway Bench

Front View .  Bench was constructed from 1-1/ 2" thick  x  6" Wide  x  55" Long Walnut.  Legs are Steel.  Top of Seat is 20" off the Ground and is 18" Wide.   Finish on the Wood is Three Coats of "TUNG OIL".


                                     
PRICE:  $ 1,000.00  -  $ 1,200.00






Side View

Side View showing the Walnut Seat Planks and Storage Drawer Unit








View of Steel Legs:

Legs Were fabricated (welded) from 1/2" Thick Hot Rolled Steel.  After being welded they were Ground and Sanded smooth.  Three coats of Lacquer was applied.  The view also shows the Holes in the Top of the Legs to be used for fastening the Walnut Planks.








View of Drawer Unit:

The Storage Drawer unit was constructed from 3/4" Walnut and is 6" High  x  16" Wide  x  18"  Deep.  The Pull out Drawer is constructed from 1/2" Birch and rides on Full Extension Ball Bearing Slides.  The Drawer Unit can be removed by removing the screws that run up thru the spaces between the Seat Planks.  The Drawer Pull was supplied by the Customer.


 WALNUT LIVE EDGE

 
Front View .  Bench is constructed from 2" thick Walnut and Figured Cherry.  Top has Cherry Butterflies inlet into surface across a crack.  Legs are Tapered and have a Cherry Insert in the middle.  Stretcher is Figured Cherry.  Bench is 9' Long x 12" Wide x 18" High.  Finish is three coats of Low Luster TUNG OIL.
 
 PRICE: $ 700.00 - $ 1,000.00



 
 
LEG DETAILS  Legs are 2" Thick Walnut and they taper 3/4" from Top to Bottom on each side.  There is a 2" Wide Cherry insert in the middle.   The insert is set back from the edge by 1/4".  Stretcher is held in place with a Cherry Tapered Peg.
 
 
 
 
 

 
STRETCHER:  the stretcher is made from Figured Cherry with a Hand cut Tenon on each end.   It is 2" Thick and 5-1/2" Wide.
 
 There is a Cherry Center support let into the bottom of the Seat and the Top of the stretcher.
 
 
 

 
 
BUTTERFLY INLAYS  There are two Cherry Butterflies inlaid into the top of the Bench over a crack on each end of the Bench  . 
 
 
 
 
 
 



 
                                                 BUTTERNUT BENCH
 
 
Front View .  Bench is constructed from 2" thick Butternut.  Stretcher is a T shape -  4" High and 4" Wide.  Bench is 9' Long x 12" Wide x 18" High.  Finish is three coats of Low Luster TUNG OIL.
 
 
 

PRICE: $ 700.00 - $ 1,000.00
 
 
 
LEG DETAILS   Legs are 2" Thick Butternut and they have a shaped Top with a Taper to the Bottom.  Stretcher is held in place with a Butternut Tapered Peg.  There is a Butternut Center support let into the bottom of the Seat and the Top of the stretcher.







CEDAR STORAGE BENCH


Front View:  Bench is 96" long  x  20" Wide  x  18" Deep and has a 2" Thick Cushion on the TOP.  It was constructed from A & Better Cedar using a Frame and Panel construction.  Bottom and Back have Slats in lieu of the Solid Panels on the Front and Ends.  Being shipped without a finish at customer request


PRICE:   $ 2,000.0 - $ 2,100.00


TOP:  Lid is Fastened to the Back Frame with Four Stainless Steel Hinges (being shipped to Bermuda).   Top can be held open with a support stick on each end.  Cushion is removable.

 
 
 
 
 
 

 
 
 
 
 
 
Website Builder provided by  Vistaprint