WOODEN-IT-BE-NICE -                   Stephen M. Jornov  -  Owner/Craftsman
ALL ITEMS ARE CUSTOM MADE TO ORDER. THEY ARE MADE TO THE SIZE REQUESTED AS WELL AS THE WOOD DESIRED AND ANY INTERIOR OR EXTERIOR TREATMENT REQUIREMENTS.
**********************************************************************************************************

Modern Sleigh Bed


Bed is a Queen Platform Bed with Drawer units on both sides.  It was constructed from Solid Cherry and Cherry Veneer Plywood.  Headboard has an ARC for Back rest when sitting.  Drawers are mounted on Push to Open / Close, Full Extension Slides. 

Finish is Georgian Cherry Stain w Three Coats of Sprayed Semi Gloss Polyurethane.

Price:   $ 1,800.00



Left side of Headboard showing ARC on Headboard and Pull out Butlers Tray.











CHERRY MURPHY BED




Bed Cabinet is constructed from 3/4" Cherry Cabinet Grade Plywood and Solid Cherry For the Frames / Trim.  Cabinet is 63" Wide  x  95" High  x 16" Deep and will hold a Full Sized Mattress.  Top Doors hold a Storage area.  Door Handles are 5-1/2" Long and are Satin Finish.  Cabinet was Stained Cherry (Jel'd) and was finished with Four Coats of sprayed Semi-Gloss Polyurethane.  Cabinet can be completely disassembled for ease of moving.

Price:   $ 3,800.00




View of Installed Murphy Bed Cabinet and Associated hardware is wall Alcove.
Headboard is Slanted approximately 10 degrees.
Matching Cherry Back Wall panels installed.

Bed Platform is in Down position and Doors to Top Storage area are open.


CURVED Headboard w Shelf


Bed Frame is for a King Size Mattress.  Headboard is 51" High, 84" Wide and 12" Deep.The curved part starts 24" off the Floor.
Footboard is 24" High and Side Rails are 17" High.   Shelf is 8" high  x 8" deep and starts 8" from each end.  Made from Cabinet Grade Birch Plywood, Bendy Plywood and Birch Veneer.


PRICE:  $ 1,500.00 - $ 1,700.00



Trim wraps around Foot board s well as Headboard at the same height as the Side Rails.

Bed was stained with a custom Blend to match the existing Trim in the room.  Finish is Four coats of Semi-gloss polyurethane.

Mattress is supported by slats that rest on a strip on the side rails as well as a center support board.


PAINTED BED w PADDED HEADBOARD

Side View - Queen Bed Frame was made from Solid POPLAR.  Left Side has a Pull out Trundle Bed and Right Side has a three Drawer Storage Unit.  Headboard has a Padded Upholstered Insert.   Finish is Four coats of Semi-Gloss Paint per customers choice color.  Mattress platform is a 3/4" thick sheet of Birch Plywood
                                 
PRICE:  $ 2,600.00  -  $ 2, 800.00



View of Headboard -  Queen Headboard Frame was made from Solid POPLAR.  Posts are 3" SQ and Frame Rails are 4" wide.
Top is 6" Wide and has a Moulding installed under it.   Upholstered insert is removable (held in place w screws from the Back) and consists of a 1/2" thick wood panel with 1" of Foam , then  a covering of Muslin, then the Fabric selected by the customer.




Rt Side View - Right Side has a three drawer storage unit installed.  Drawers are made from 1/2" Birch Plywood and are mounted on full extension ball bearing slides.  Interior was finished with three coats of semi-gloss Polyurethane.  Storage Unit and Trundle Unit are both removable and can be interchanged.





MAPLE and WALNUT Platform BED


Side View . Queen Bed Frame was made from Solid 1-1/4" Thick Hard Maple.  Sides have Two Walnut Inset Panels and Middle Basket Storage area.  Finish is Four coats of sprayed Semi-Gloss Polyurethane.




                                    
PRICE:  $ 2,400.00  -  $ 2, 600.00



End View.  Bottom end has Two Storage Drawers with Walnut Face Panels. The drawers are mounted on Push to Open / Push to Close Full Extension slides.  The Entire Bed can be disassembled for ease of moving
                                     






CHERRY BED


Headboard and Foot Board . Queen Bed Frame was made from Solid 1-1/4" Thick Cherry.  Headboard Panels are 1/2" Cherry Plywood with a Figured Cherry Veneer applied. Finish is Two Custom Blend Stains with Four coats of sprayed Semi-Gloss Polyurethane.  Bottom Stringers have a slight arc on the bottom.


PRICE:  $ 2,400.00  -  $ 2, 600.00




Headboard Panels are 1/2" Cherry Plywood with a Figured Cherry Veneer.  Frames have a Dark Custom Blend Cherry Stain while the Panels have a Lighter Custom Blend Cherry Stain.

Bed Side Rails have Bed Hooks for easy of assembly to the Headboard and Foot Board




OAK MISSION BED


Headboard and Foot Board . Queen Bed Frame was made from Solid 1-1/4" Thick White OAK.  Slats on Headboard and Foot Board are 2-1/2" Wide  x 1/2" Thick and are mortised into the Frames. Finish is  Four coats of Hand Rubbed "TUNG OIL".




PRICE:  $ 2,200.00  -  $ 2, 400.00 




Close-up of Headboard Corner.  Posts are 2-1/2" Square and have a Corbell with a slight curve.

Top of Headboard has a 2-1/2" Wide Flat shelf with slightly eased edges.

Slats are 2-1/2" Wide  x 1/2" Thick and are mortised into the Frames

















QUARTERSAWN  OAK MISSION BED



Headboard and Foot Board . Queen Bed Frame was made from Solid 1-1/4" Thick QUATERSAWN White OAK.  Square Spindles Slats on Headboard and Foot Board are 5/8" Square and are mortised into the Frames. Finish is  Four coats of Hand Rubbed "TUNG OIL"applied over a pore sealer.


PRICE:  $ 2,400.00  -  $ 2, 600.00



Close-up of Headboard Corner.  Posts are 2-1/2" Square and have a Corbell with a slight curve.

Top of Headboard has a 2-1/2" Wide Flat shelf with slightly eased edges.

Slats are 5/8" square and are mortised into the Frames which have a slight curve on their bottom edge.










Website Builder provided by  Vistaprint